Promax 26 Manual De Instrucciones página 93

USER'S MANUAL. PROMAX-26
These measurements are stored to be later display, printout or transfer to a PC.
The PROMAX-26 allows user to store up to 100 loggers (or acquisitions) in the
internal memory, with up to a maximum of 140 analysed channels in each of them.
A screen as the following figure appears when the LOGGER [F4] key is
pressed. On the left side of the screen appears the number of the logger (0 in the
example) followed by the time and date it was acquired (only if an execution of the
STORE function has been performed for this logger).
The selection box contains the functions that can be activated for that logger:
DEL [F2], VIEW [F3] or PRINT [F4].
In order to recall the different loggers stored, press the navigation buttons [6]
until the selection arrow marks the logger number to access.
To return to the MODEM functions menu, press the BACK [F1] option from the
lower selection box.
To delete the measurements stored in a logger select the DELETE [F2] option.
A message to confirm the erasing procedure will appear on screen.
To view the measurements stored in a logger select the VIEW [F3] option:
02/2007
Figure 15. - List of stored loggers.
Page 29