Alarm Functions - Samsung SVR-24JP Instrucciones De Uso E Instalación

ALARM FUNCTIONS

The alarm functions include the alarm recording, alarm checking alarm clear, and alarm
counter memory. (Refer to Alarm Recording, page 32)
CHECKING OF ALARM RECORDING
1
Press the MENU button
❿!
1. Place the sign in the "ALARM
REC SETUP/RECALL" position
using the SHIFT ❷ ❷ button.
❿ ❿
2. Press the SHIFT button, then
the "ALARM RECALL" displays.
3. Press the MENU button after
checking.
ALARM RECALL
YEAR DATE TIME
1 2001 12/25 19:00:00
2 2001 12/25 17:00:00
3 2001 12/25 15:00:00
4 2001 12/25 13:00:00
5 2001 12/25 12:00:00
6
END:MENU
PLA Y
JEC T
STO P/E
ER
PO W
1 2
1 1
1
33
•
When an alarm recording is not
made, there is no display on the
screen display.
•
The ALARM RECALL screen
displays the "6" most recent
alarm recorded events with the date
and time of each.
•
If the alarm is recorded at 12:00,
13:00, 15:00, 17:00 and 19:00 on
December 25, 2001.
REC
P/S TILL
CK
REC CHE
REFERENCE
Display of operating time
• When the front display indicates
2 2
COUNTER button twice.
The operating time is then indicated on the front display.
example) When operated for 11 hours.
HOUR
• If the counter button is not entered within 5 seconds
when checking the operating time, the status of the
front display returns to the state prior to checking the
display of operating time.
ALARM COUNTER MEMORY
1 1
Press the CNT. MEMO
• Press the CNT. MEMO button twice, then
the front display indicates "A. MEMO".
CNT MEMO
ALARM CLEAR
1
example) When the alarm recording is made
at No. 12.
Press the COUNTER button
• A-12 is indicated at the counter position
on the front display.
• From "
of alarm recording.
• It is possible to display up to "
• When the alarm recording is made, the
on " " the front display flashes.
COUNT
REFERENCE
The alarm sounds five times in the following cases;
• When a tape without an erasure prevention tab is inserted.
, press the
– When the series signal is entered. (long sound)
– When the alarm signal is entered.
– When the record button is pressed.
– When pressing TIMER button.
• When pressing the REC button with the tape ejected.
• When the alarm signal is entered during alarm recording.
2 2
Turn the SHUTTLE ring
clockwise or counterclockwise
• When turning the shuttle ring the tape
moves forward (backward). When it
arrives at the alarm recording in only
L3H mode encounted first, it pauses for
5 seconds and then stops.
A.MEMO
2
Press the CLEAR button
• The counter position on the front display
indicates "
• The " " is turned off.
• When pressing the CLEAR button while
the alarm check screen is displayed, all
", the "12" indicates the times
the data and time in memory are
erased.
"
CLEAR
The alarm sounds continuously in the following cases;
• When the tape arrives at its end in the recording mode.
• When the alarm signal is entered for alarm recording.
– When the alarm recording is ended the alarm is released.
– The alarm is released when pressing any button
– When the alarm signal is entered with the tape ejected.
(long sound)
Auto repeat recording
• When the rewinding is completed after the tape arrives at
its end, recording is restarted.
(The alarm sounds during rewinding only.)
• If alarm recording is made, tape is ejected.
".
34