Operate The Prismplus; Setting Up A Standalone Prismplus; Connecting The Cables - Rimage PrismPlus! Guia Del Usuario

Rimage PrismPlus!

Operate the PrismPlus

Setting up a standalone PrismPlus

Use these procedures to step up a standalone PrismPlus printer.

Connecting the cables

1. Connect the parallel cable to the parallel cable connection at the back of the printer.
2. Connect the other end of the parallel cable to a parallel port on the back of the PC.
3. Connect the power cord to the printer.
4. Plug the power cord into a suitable electrical outlet.
Parallel Cable
Power Cord
6 110635_H