Product Description - Shindaiwa AH2510 EVC Manual Del Propietario - Operador

Product D D escriptio
Spark
Throttle
Ignition
interlock
Throttle Trigge
Using ng the illustration
guid d e, familiarize yo
with h the Shindaiwa
arti ticulated hedge
me mer and its variou
ne nents. Understan
m m achine helps e
p p erformance, lo
life, and safer o
starte
Model
Engine Type
Engine Bore x Stroke
Engine Displacement
Unit Weight, Less Fuel
Unit Dimensions (LxWxH)
Max. Power
Recommended mmended idle speed
Fuel Tank Capacity
Fuel/oil ratio
Carburetor
Ignition
Spark Plug**
Electrode Gap
Torque
Air Cleaner
Starting Method
Stopping Method
Blade Length
Clutch Type
Gear Type
Gear Lubrication
Standard Equipment
EPA Emission Compliance Period*
Specifications are subject to change without notice.
4-cycle, vertical cylinder, air cooled
34 x 27 mm/1.34 x 1.06 in.
24.5cc/1.5 cu. in.
2360 x 225 x 235 mm / 92.9 x 8.9 x 9.3 in.
0.8 KW / 1.1 hp @ 7,500 min
3,000 (±250) min
50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing O
Walbro WYL, Diaphragm type
Fu Fully electronic, program controlled
0.6 - 0.7 mm/ .024 -.028 in.
100-150 kg cm / 9.8 - 14.7 N∙m
Foam pre-filter; sealed felt main filter
Slide switch, grounding type
Automatic, centrifugal clutch with bevel gear
Lithium-based grease
Tool kit w/ spark plug wrench, 4 mm hex wrench, 8 x 10 mm spanner, blade scabbard.
* The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operat- t t
ing hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125
hours (Intermediate) and A = 300 hours (Extended).
** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).
Latch Lock
Gearcase
Latch
Release
AH2510
6.3 kg/14 lbs.
-1 (rpm)
-1
590 ml/20.3 oz..
NGK C NGK CMR5H
28 in
Recoil type
567 mm/22.3 in
Spur gears
Category A
Hedge Trimmer
Cutter Bar and
Cutter Blades
IN ! G!
alter r this machine
ompon onents!
Oil
5