Hioki CM4375 Manual De Instrucciones página 43

*1: Does not apply to AC detection in AUTO V mode.
*2: Does not include range change time.
Ω
*3: Defined for 1 k unbalance, 0 Hz/50 Hz/60 Hz input
*4: Defined for 50 Hz/60 Hz input
(4) Other Measurement Specifications
Overload 1700 V DC
protection Lower of 1000 V AC or 2×10
(Applied continuously for up to 1 min.)
Overload current At steady state: 30 mA or less
At transient state: 1.5 A or less
Display update Capacitance
1
rate*
Temperature (Thermocouples [K])
Response time
Continuity check
Open terminal Continuity check/resistance/diode 2.0 V DC or less
voltage
Continuity on 25
threshold
Continuity off 245
threshold
7
Ω Ω
±10 (continuous buzzer sound, red warning backlight lights up)
Ω Ω
±10
Input specifications/Measurement specifications
V · Hz
0.5 times to 5.0 times/sec. (varies depending on
the capacitance)
1 time/sec. (including check for thermocouple
wiring breaks)
Detection of open or short for 0.5 ms or more
1
2
3
4
5
6
索
引
39