Eurocave Compact Instrucciones De Montage página 19

PARt
bx4
ax2
cx2
ex2
dx6
fx2
tooL REQUiRED
PARtS
A
Bx2
C
ASSEMBLy
FAStENiNGS
gx4
1 B
e
C
c
d
A
b
2
a
f
3
4
to be wall mounted
B m
aSic odule
ASSEMBLy
1
Fit the 6 dowels (d) and the 2 connecting bolts
(e) in the sides (B). Place the 2 bolt locks (c) in
the back piece(C).
Fit the back piece (C) on one side (B).
Turn the bolt lock (c).
Fit the rack (A) onto the 2 dowels (d).
Push the 2 screws (b) into the rack and screw
together the assembly.
d Repeat the same procedure on the other side (B).
b
VERtiCAL ASSEMBLy
2
Position the 2 dowels (f) in the lower module
(Pedestal or Basic).
Fit the basic module onto the lower module.
Place the 2 securing plates (a) on the pedestal
module and screw together.
3
When the 2 modules abut, you will need to
link them using 4 linking screws (g). Push the
linking screws into the holes provided in the shelf
support strips on the 2 contacting panels. Tighten
until the 2 panels are flush and in line.
g
4
The basic modules above the first should be
secured to the wall from the 2nd level using 2
securing screws (not supplied) suitable for the
wall type.
( 1/ 1 40)
mv mv l
5
GB