Eurocave Compact Instrucciones De Montage página 24

c m
roSS
FAStENiNGS
a*x4
*No screws are provided, the
screws to be used are the
ones for the basic module.
tooL REQUiRED
PARtS
Ax2
Bx2
Cx2
10
GB
( 18)
odule mv
Before locating the cross module, remove all the bottles from the top module.
1
2
3
4
Front securing
guide
WARNiNG !
A
5
Rear securing
guide
a
ARRANGEMENt oF
SUPPoRtS
1
Unfold the 2 support cross-pieces (A). Pull up
ends in relation to centre to form an X. Notice
that the arms of the X are NOT of equal length.
2
a: The rear support cross-piece is placed with
the long arms uppermost.
b: The front support cross piece is placed with
the long arms downward
SEttiNG UP SUPPoRtS
3
Remove the 4 securing screws (a) from the
upper rack. Install the rear support at the back of
the basic module.
4
Center the rear support (a) by screwing it
onto the rear metal 135° guides (B) on the upper
rack.
5
Install the front support in front of the rear
support and centre it (a) by screwing it onto the
front metal 90° guides (C) on the upper rack.
N.B.: You may expect slight play on the cross modules
inside the basic module.This is normal because
wood is a living material that moves with levels of
atmospheric moisture.