Eurocave Compact Instrucciones De Montage página 28

P
ivoting
FAStENiNGS
ax2
tooLS REQUiRED
PARtS
A
B
Cx2
Dx2
14
GB
B H
ottle older
Before setting up your bottle holder in position, remove the shelves and the bottles
from the basic module. if your module is equipped with sliding shelves, the securing
tab will be located between two sliders.
1&2
A
3
C
4
D
5
Shelf closed
( 211)
mv
WARNiNG !
a
B
Shelf open
View from above
ASSEMBLy
1
Position the securing tab (A) inside the basic
module, to the right or left and at the required
height. Pierce 2 starter holes using a bradawl.
2
Secure using 2 screws (a).
3
Equip the bottle holder (B) with the two
plastic protective end pieces (C).
4
Position the bottle holder on the securing tab,
insert the 2 rivets (D) and fit by exerting light
pressure on each of them.
5
When the bottle holder is in place, it swings
on itself so as not to hinder the movement of the
sliding shelves.