Gt Hardware Adjustment - Permobil BODILINK Guía De Usuario

SUPPORT PAD - HARDWARE ADJUSTMENT

GT Hardware Adjustment

Note: Lateral Style GT Hardware (without additional link added)
is shown. Mid-line GT hardware does not have angle adjustment
points.
Note: Adjustments should be made simultaneously with pad
positioning adjustments.
1
Loosen all the hardware adjustment point screws,
allowing for the full articulation of the head support to the
desired position.
2
Hold the hardware and the pad in place while tightening
each joint.
Note: As the gear teeth engage, adjustments may affect each
other and may require compensation from the other joints
before the final tightening.
WARNING: Make sure that the teeth on all link joints are
properly aligned and engaged before final tightening. Failing to
do so could cause wear on the teeth, leading to parts slipping
out of adjustment or hardware failure. (GT Hardware only)
Gear Teeth Alignment
D
BodiLink Head Support User Guide & Manual
D
= Angle/Lateral Offset
(A)
= Depth
(D)
= Height
(H)
A
H
17
14W x 5L pad
A