Locking The Height Adjustment Collar - Permobil BODILINK Guía De Usuario

SUPPORT PAD - HARDWARE ADJUSTMENT

Locking the Height Adjustment Collar

Note: The 3" hardware stem does not have a height adjustment collar.
1
Finish the setup by loosening the set screw (D) in the collar (A).
2
Slide the collar (A) onto the hardware stem (C) to meet the top of the mounting
block (B).
3
Tighten the set screw (D) in the collar with the 2mm hex key until contact is made
with the hardware stem. This allows for the easy positioning of the hardware if it is
removed and then replaced.
Note: Collar (A) is retained in a track in the hardware stem (C). If the collar needs to be
removed, remove the set screw (E) located in the track at the bottom of the hardware stem
with the provided 2mm hex key.
D
BodiLink Head Support User Guide & Manual
A
C
GT Hardware
19
B
A
C
E