Inspection; Reuse; Storage; Disposal - Permobil BODILINK Guía De Usuario

MAINTENANCE

INSPECTION

Inspect all head support components weekly.
Check and tighten all fasteners and adjustment points.
Inspect all materials for wear such as stretching,
fraying, fractures, and bends. Some wear with regular
use is expected.
Components that show excessive wear should be
replaced. For information on replacements, refer to
the "Warranty" section in this manual.

REUSE

You must re-fit the support to the new user or after
extended periods of non-use by the same user. Refer
to the adjustment and use instructions in this manual.
Before transferring to a new user, the product must
be completely cleaned and disinfected. Refer to the
cleaning instructions in this manual.

STORAGE

Assembly or individual parts should not be stored
in extreme hot or cold temperatures. Only store in a
clean and dry place at room temperature.
Do not allow exposure to direct sunlight for prolonged
periods of time. This could age the product more
rapidly and decrease its effectiveness.
Do not store where there is risk of open flame or
spark.

DISPOSAL

Dispose of the product and/or components in
accordance with the applicable regulations in your
jurisdiction.
CAUTION! DO NOT INCINERATE as a means of
disposal.
BodiLink Head Support User Guide & Manual
WARRANTY
This product is covered by the Permobil Lifetime Guarantee.
If a manufacturing defect should occur, discontinue use
immediately.
If a manufacturing defect should occur, the product will be
replaced at no cost to the buyer. Register your product at
permobilus.com to activate the Lifetime Guarantee.
Wear from regular use is not considered a manufacturing
defect. Replacement parts are available by contacting your
supplier, distributor, or retailer.
Any alterations made to the product or defects caused by
irregular use voids the warranty. Compatibility with the
BodiLink Head Support system is only guaranteed with
the Permobil products listed in this manual. Modifications
in attempt to interface with any other products voids the
warranty.
WARRANTY REPLACEMENT PROCEDURE
Warranty claims should be filed by the original purchaser.
End-users will need to contact the DME Supplier, Distributor
or Retailer from whom the product was purchased. In the
event the original dealer is not available, any authorized
Permobil DME supplier, distributor or retailer will provide
assistance.
DME suppliers, distributors or retailers with warranty
issues will need to contact Customer Support by phone
or email and provide the original purchase order number,
sales order number, or invoice number whenever possible.
A Return Merchandise Authorization (RMA) will be issued
by Customer Support so a warranty replacement order or
quote can be processed.
COMMENTS
If you would like to contact us with your comments or
concerns, please visit permobilus.com or refer to the
"Contact Information" section of this manual.
We invite you to leave testimonials of the product on our
website on the individual product pages.
21