Starting, Stopping, And Saving A Ride; Taking Splits; Viewing Data During A Ride - Timex Cycle Trainer 2.0 Manual Del Usuario

sTarTIng, sToppIng, and saVIng a rIde

Starting a riDe
• From Speedometer mode, press START.
If the GPS does not have a satellite fix, a message indicates this and asks if you want to start the timer
anyway. To do so, press  to highlight YES, and press ENTER. The timer begins, but only time data and
data from paired sensors is recorded.
Stopping a riDe
1. While the timer is running, press STOP to pause the timer.
2. If the timer is stopped, but has not been reset, press START to resume timing.
Saving anD reSetting a riDe
1. While the timer is paused, press RESET to save the ride and reset the timer.
2. Highlight YES, and press ENTER.
All collected data is saved. See

TaKIng splITs

What are lap anD Split timeS?
Lap time is the length of an individual segment of your ride. Split time is the time elapsed from the beginning of
your ride through the current segment.
When you "take a split", you have completed timing one segment (such as one lap) of the ride and are now
timing the next segment.
The graph below represents the lap and split times for a ride in which 4 laps were taken.
LAP 1
7:11 MIN
7:11 MIN
SPLIT 1
taking a Split
• While the timer is running, press LAP to take a split.
Data for the lap you just completed is displayed, and the Cycle Trainer begins timing the new lap.
Once you stop and save the ride, you can review route and ride data for each lap, as well as for the ride as
a whole.

VIeWIng daTa durIng a rIde

There are several screens you can view during a ride to see real-time data.
• Press to cycle through the display screens.
The screens display in this order:
• Time of Day
• Map (if activated)
• Compass (if activated)
• Custom Page 1
• Custom Page 2
• Custom Page 3
• Custom Page 4
The four custom screens can be configured to show many different types of data. See
Pages for data that can appear in custom screens and configuration instructions.
Reviewing Rides for instructions on viewing saved data.
LAP 2 LAP 3
7:50 MIN 7:08 MIN
15:01 MIN
SPLIT 2
22:09 MIN
SPLIT 3
LAP 4
7:30 MIN
29:39 MIN
SPLIT 4
11
Configuring Custom