Technical Specifications - Skoda iV Charger Manual De Instrucciones

1.4 Technical specifications

Feature
Electrical properties
Connection capacity
Charging capacity
Charge mode
Fixed charging cable
Number of fixed charging cables 1.
Charging cable length
Installation wiring
Metering
Safety and certification
Upstream installation
protection
Static power limitation
Earth leakage sensor (ELS)
Ground loss monitor
Black-out protection
CT colis supported
Operating temperature range
Storage temperature range
Operating humidity
Maximum installation height
Enclosure ratings
Certification
*For ŠKODA iV Charger Connect and ŠKODA iV Charger Connect+ only.
Description
1-phase, 230 V, 32 A, 50 Hz.
3-phase, 400 V, 16 A, 50 Hz.
7.4 kW (1-phase - 32 A).
11 kW (3-phase - 16 A).
Mode 3 (IEC 61851) - ISO 15118*.
Type 2 plug (IEC 62196-2).
4.5 m or 7.5 m.
16 A installation input terminals: 1 - 6 mm².
32 A installation input terminals: 1 - 10 mm².
Optional, for ŠKODA iV Charger Connect+.
Minimum dedicated 1-phase 32 A (32 A station) or
3-phase 16 A (16 A station) upstream circuit breaker
and at minimum RCD type A (30 mA AC). Check local
installation requirements if additional measures are
required.
Via DIP-switches.
6 mA DC.
Physical connection m quality monitoring, without
ground monitoring
Via CT coils - optional comfort feature.
Invasive / non-Invasive - 40 A - 200 A,
brands: VAC, LEM, and Nidec.
See chapter Set DIP-switches for the supported
models.
-30 °C - +50 °C.
-30 °C - +85 °C.
Max. 95 % - non-condensing.
Max. 4000 m above sea level.
IP54 (IEC 60529), IK10 (IEC 62262).
See EU Declaration of conformity
EN
13