7.2 Configure the ŠKODA iV Charger Connect and ŠKODA iV Charger
Connect+ locally
Note: For further information about the configuration, refer to the online manual at
www.elli.eco/download.
Precondition: The wallbox is installed and you have the configuration sticker which is sup-
plied with the charging station.
1. If the input power to the wallbox is on, have it switched off at the power supply
cabinet. Then have the input power switched on again.
2. The LED indicating the wallbox's state shows solid blue and the Configuration
Manager is accessible.
3. Stand close to the wallbox with your mobile device.
4. Connect to the Wi-Fi Hotspot listed on the sticker.
5. Open any internet browser on your mobile device and enter the IP-Address for
the Configuration Page: 192.168.123.4
6. Use the Configuration Page Password shown on the sticker to log in to the Con-
figuration Manager.
7. Configure the settings of the wallbox according to your requirements:
a. Establish an internet connection for the wallbox, e.g by setting access parameters
to your home Wi-Fi or local area network (LAN).
b. Set your personal preferences, for example: language, log-in password, use of
charge cards for access control.
EN
45