Assembly - Imetec N4902 Instrucciones De Uso

• Unpack the appliance and remove any inserts or adhesive labels from the product.
• Remove the protective cover from the ice crushing blade and the blade for chopping and kneading.
• Carefully wash all removable parts in contact with food (indicated as follows) by hand, using hot water
and washing up liquid:
‫ ܞ‬the measuring cup, the lid, the lid seal, the spatula, the mixing blade and the steaming basket.
‫ ܞ‬the blade for chopping and kneading and the ice crushing blade – use a toothbrush and hold the
blades at the top to avoid cutting yourself.
‫ ܞ‬the bowl – taking care not to wet the underside of the bowl where the contacts are. If the contacts
accidentally get wet, dry them thoroughly with a cloth before putting the bowl back on the bowl
mounting.
• Clean the base of the product and the bowl mounting with a damp cloth that has been thoroughly
wrung out, taking care not to wet the area where the bowl connector is.
• Dry all washed parts thoroughly.
• Place the base of the product on a stable and smooth level
surface, at a safe distance from any edges to prevent the risk of it
falling during use. Ensure that the suction pads adhere securely
to the underlying surface.
• Put the bowl in the bowl mounting by pushing it down until it
clicks into place.
‫ ܞ‬the whisk (fitting it directly onto one of the blades).

ASSEMBLY

• Fit the suitable accessory for the required process:
‫ܞ‬ the blade for chopping and kneading or the ice crushing blade
(hold the blade at the top to avoid cutting yourself, and fit it on the
helical drive spindle).
EN
25