Grinding Coffee And Other Dry Foods - Tribest Soyabella SB-130 Manual De Instrucciones

OPeRaTIng InsTRuCTIOns
F. gRInDIng COFFee anD OTHeR DRY FOODs
Follow these instructions to grind coffee, nuts, grains, or seeds.
1. Load Grinding Cup: Using the measuring cup, take a full cup of coffee beans, nuts, grains,
or seeds and load them into the Grinding Cup.
2. Attach the Grinding Cup to the head unit: Attach the grinding cup to the head unit by
moving the blade in a side-to-side motion to allow the grinding cup to slide properly into
place. Lock the grinding cup into place by turning it counter-clockwise.
• CAUTION: BE SURE THE GRINDING CUP IS PROPERLY LOCKED IN PLACE!
If the grinding cup becomes loose during operation, the spinning blade could damage
the grinding cup!
3. Assemble machine and run MILL function: Connect the head unit to the stainless steel
chamber. Make sure the upper plug slides into the upper plug receptacle on top of the
handle. Plug the provided power cord into the power cord receptacle, and connect the
other end to a wall socket. Once plugged in, Soyabella will beep and a red light will flash,
indicating that the power is on. Choose the grinder setting by pressing the "MILL" button
on the head unit, and the flashing red light will turn solid. The grinder will immediately
begin milling your ingredients for approximately 10 seconds. After about 3 seconds, the red
light will flash. Repeat this procedure 3-5 times, depending on how fine you want the grind.
4. Enjoy your freshly ground coffee, nuts, grains, or seeds: Unplug the base unit. Lift the
head unit from the stainless steel chamber. Carefully unlock the Grinding Cup by turning it
clockwise and remove it from the head unit. Your ingredients are ready to be enjoyed.
• TIP: If further grinding is needed, follow directions from step 2 and run through
another cycle.
14