Operation On Battery - MGE UPS Systems Pulsar EX15 Manual De Instrucciones

operation on battery

when the AC power fails, the operating sequence is the following:
AC power failure
0 mn
indicate the
1a 1d
to
remaining
battery backup
time (here,
between 70%
-
+
and 90%)
1e
- flashing/power off
% +
1f
on/load energized
3 short beeps
c your loads are being
supplied by Pulsar EX from
battery power.
MGE UPS SYSTEMS
low-battery
shutdown warning
80% T mn
1a 1c
to off
-
+
flashing/low-battery
1d
shutdown
warning
1e flashing/power off
-
% +
1f
on/load energized
intermittent beeps
c there is less than 20% of
battery backup time left:
shut down your applications
as automatic shutdown of
Pulsar EX is imminent.
Pulsar EX : 51032306XT/BB
automatic shutdown of
Pulsar EX at end of
backup time
T mn
1a 1d
to off
-
+
1e flashing/power off
-
% +
1f
off/load de-energized
silence
c your loads are no longer
being supplied.
if Pulsar EX is
operating with no load
(power-saving mode set
up using EX Driver):
device will be shut
down after 5 mn
5 mn
1a 1d
to off
-
+
flashing/power
1e
-
% +
off
1f
off/load de-
energized
silence
c your loads are no longer
being supplied.
33