Auto Power Off (Apo Mode) - BRAND Titrette Instrucciones De Manejo

11.3 Auto power off (APO mode)

In APO mode, the time for automatic power off can be set from 1 to 30 minutes. The factory default
setting for automatic power off is 3 minutes. The shorter the auto power off time setting, the longer
the batteries will last.
1. Entering APO mode
a.
b.
2. Entering the time for automatic power off
a.
3. Confirming input
a.
Press the CLEAR button to confirm the input of desired power off time or to confirm 'oFF'.
When the instrument switches itself off, the last displayed value is displayed again after the instru-
ment is switched back on. If the input value 'oFF' is confirmed, the function is deactivated and the in-
strument will no longer switch itself off.
9974 69
a.
With the instrument powered on, press and hold the
> 3 s
CLEAR button for more than 3 seconds until the follow-
ing modes are repeatedly shown one after another in
the display:
CAL — GLP — APO — dP
b.
When APO appears in the display, release the CLEAR
button. The input symbol blinks and the factory setting
is displayed.
a.
Press the Pause or On/Off button until the desired time
entry (1 - 30 min) has been reached. 'oFF' deactivates
automatic power off.
-
+
NOTICE
11 Additional functions
73
Operating manual