Pgrade; External Programming Card; Fans - df models KL-35 Manual De Instrucciones

Resetting the values to the default settings
Put the accelerator/brake lever into the neutral setting and press and hold the set button
(except in programming mode!) for more than 3 seconds. The values are reset when the red and
green LEDs blink simultaneously.
9. u

pgradE

External programming card

An external programming card is available as an "upgrade" with the accessories,
It can be used to program the speed controller directly with a user-friendly interface
and a display!
The external programming card will display the programming step and the selected value
directly on a display.
1V fans
If your are using a NiMH battery with 7-9 cells or a LiPo battery with more than 3 cells, the
installed 5V fan will be be strong enough for cooling.
Replace the installed fan with a high-voltage fan with a higher operating voltage (12V).
- 1 -