Skymsen PA-14-N Manual De Instrucciones página 18

PROBLEMS
- Irregular Cut
- The product that was sliced
is stuck inside the appliance.
- The appliancedoesn´t turn on
- Cheiro de queimado e/ou
fumaça.
- The appliance turns on, but
when the product is put in the
machine, it stops or Works
with low rotation.
- Damaged electrical cable.
18
CHART 03
CAUSES
- The blade has lost the cutting
line.
- Lack of the Expelling Plate.
- Problems with the internal or
external electrical circuitfrom
the appliance.
-Lack of energy.
- Problem in the internal or
external electric circuit of the
appliance.
- Belt slipping.
- Lack of electric energy.
- Problems with the Motor.
- Problems with the
transportation of the appliance.
SOLUTIONS
- Sharpen the blades.
- Assemble the Expelling Plate.
- Call The Authorized
Technicians
- Check if there is eletricity.
- Call the Authorized Technical
Assistance.
- Adjusts the tension of the
belts.
- Check if the plug is
connected to the outlet;
- Call the Authorized Technical
Assistance
- Call the Authorized Technical
Assistance