Maintenance - Skymsen PA-14-N Manual De Instrucciones

6. Maintenance

It is considered MAINTENANCE the group of actions that aim to offer and grant the perfect
working condition of the equipment, enlarging its useful life, and general user safety.
* Cleaning – Check item 5 Cleaning of this manual.
* Cords – Check if the cords are in good condition, without any damage and if all electrical
terminals are in good condition and without oxidation.
*Contacts – Check the ON/OFF button, Reset button, electronic circuits and make sure that
all these components are working correctly and in good condition, and that the use of the
equipment is occurring in a normal way, without any inconvenient.
* Installation – Check the installation of Your Equipment as per the item
2 – Installation and Pre Operation of this manual.
- Items to check and execute monthly:
• Check the electrical grid;
• Measure the amperage intake of the electric power supply;
• Measure the working current and compare it to the nominal current;
• Check the electrical terminal connections of the Equipment to avoid contact
failures;
• Check for possible wearing or looseness in the electric motor shaft;
- 2 – Items to check and execute every 3 months:
• Check the ON/OFF button, Reset button, electronic circuits for signs of overheating,
damaged insulation or mechanical damage.
• Check for possible looseness in the assemblies and bearings
•Check the retainers, o'rings, v'rings and other seals
19