Blackmagic Hyperdeck Ethernet Protocol; Protocol Commands - Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento

Blackmagic HyperDeck Ethernet Protocol

Blackmagic HyperDeck Ethernet Protocol — текстовый протокол, изначально созданный для
управления дисковыми рекордерами Blackmagic HyperDeck через порт Ethernet. В настоящее
время его также можно использовать для работы с Blackmagic Duplicator 4K.
Поскольку дубликатор способен только вести запись, он не поддерживает все возможные команды
протокола. Этот раздел содержит перечень команд, которые применимы для Blackmagic
Duplicator 4K.

Protocol Commands

Command
help or ?
remote
remote: enable: true
remote: enable: false
remote: override: true
remote: override: false
quit
ping
record
record: append: true
stop
commands
notify
notify: transport: true
notify: transport: false
notify: slot: true
notify: slot: false
notify: remote: true
notify: remote: false
notify: configuration: true
notify: configuration: false
notify: dropped frames: true
notify: dropped frames: false
device info
slot info: slot id: {slot ID}
transport info
configuration
configuration: record mode: Duplicate
Command Description
Provides help text with all commands and parameters.
Queries the state of HyperDeck's remote control mode.
Enables remote control.
Disables remote control.
Turns remote override on.
Turns remote override off.
Disconnects HyperDeck server.
Determines HyperDeck server is responding.
Starts recording.
Starts appended recording.
Stops playback or recording.
Lists all supported commands in an XML format.
Queries the current state of all notifications.
Enables transport notifications.
Disables transport notifications.
Enables slot notifications.
Disables slot notifications.
Enables remote notifications.
Disables remote notifications.
Enables configuration notifications.
Disables configuration notifications.
Enables dropped frames notifications.
Disables dropped frames notifications.
Provides device information.
Provides information about a specified slot.
Provides information for the state of the transport.
Queries the current configuration.
Configures the record mode to duplicate.
Дистанционное управление по сети Ethernet 288