Safety Information - Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento

Safety Information

For protection against electric shock, the equipment must be connected to a mains socket
outlet with a protective earth connection. In case of doubt contact a qualified electrician.
To reduce the risk of electric shock, do not expose this equipment to dripping or splashing.
Product is suitable for use in tropical locations with an ambient temperature of up to 40°C.
Ensure that adequate ventilation is provided around the product and that it is not restricted.
When rack mounting, ensure that the ventilation is not restricted by adjacent equipment.
No operator serviceable parts inside product. Refer servicing to your local Blackmagic Design
service center.
Some products have the facility to connect small form-factor transceiver (SFP) optical fibre
modules. Only use Laser class 1 optical SFP modules.
Recommended Blackmagic Design SFP modules:
‚ 3G-SDI: PL-4F20-311C
‚ 6G-SDI: PL-8F10-311C
‚ 12G-SDI: PL-TG10-311C
Use only at altitudes not more than 2000m above sea level.
State of California statement
This product can expose you to chemicals including hexavalent chromium, which is known
to the state of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Warning for Authorized Service Personnel
Caution — Double Pole/ Neutral Fusing
The power supply contained in this equipment has a fuse in both line and
neutral conductors and is suitable for connection to the IT power distribution
system in Norway.
Safety Information 37