Configuring - Blackmagic Design Duplicator 4K Manual De Instalación Y Funcionamiento

Querying and updating configuration information
The " configuration " command may be used to query the current configuration of the deck :
configuration ↵
The server returns the configuration of the deck :
211 configuration: ↵
video input: {"SDI", "optical"} ↵
↵
One or more configuration parameters may be specified to change the configuration of the deck .
To change the current video input :
configuration: video input: {"SDI", "optical"} ↵
 

Configuring

the watchdog
The " watchdog " command instructs the deck to monitor the connected client and terminate the
connection if the client is inactive for at least a specified period of time .
To configure the watchdog :
watchdog: period: {period in seconds} ↵
To avoid disconnection , the client must send a command to the server at least every { period } seconds .
Note that if the period is set to 0 or less than 0 , connection monitoring will be disabled .
 
Configuring the record
Use the ' record mode ' command to select the deck recording mode :
configuration: record mode: {"Duplicate", "SingleDisk",
"DiskOverwrite"} ↵
  
Configuring the file format
The ' file format ' command instructs the deck to switch to a specific file format for codec and bit rate :
configuration: file format: {"H.264High", "H.264Medium", "H.264Low",
"H.265High", "H.265Medium", "H.265Low"} ↵

mode
イーサネット経由でリモートコントロール
71