Wiring Of Control Connections - Lenze E94APNE 4 Serie Instructions De Montage

5 Wiring the device
Wiring

Wiring of control connections

5.3.4 Wiring of control connections
24 V supply
Terminal X11
9400SSP000X2
Terminal data
Flexible
With wire end
ferrule
Stripping length / contact length: 10 mm
Digital inputs, digital outputs
Terminal X12
SSP9400X12
Terminal data
Flexible
With wire end
ferrule
Stripping length / contact length: 10 mm
54
Labelling Description
GE GND external supply
24E 24 V external supply through safely separated power supply unit
(SELV/PELV)
Required for mains-independent power supply of control electronics.
IEC 61131-2, 19.2 ... 28.8 V, residual ripple max. ±5 %
Current during operation: 1.4 A
Starting current: 4 A for 100 ms
SB Reserved
Conductor cross-section
2
[mm ]
0.2 ... 2.5
Labelling Description
GOI GND digital out / in
DI1 Activation of brake chopper - for discharging after mains
disconnection only
(external 24 V supply required)
DO1 Mains OK
DO2 Brake chopper active
DO3 Short circuit in brake chopper
DO4 Heatsink overtemperature
Conductor cross-section
2
[mm ]
0.2 ... 2.5

Tightening torque
[AWG] [Nm]
24 ... 12 Spring terminal
Tightening torque
[AWG] [Nm]
24 ... 12 Spring terminal
[lb-in]
[lb-in]
EDK94PNE245 DE/EN/FR/ES/IT 1.0