ECOVACS DEEBOT N8+ Manual De Instrucciones página 10

Charging DEEBOT
Auto-Empty Station Placement
1
2 Power ON
3
Charge DEEBOT
EN 10
Note: I = ON, O = OFF.
DEEBOT cannot be charged
when being powered OFF.
6.5
Empty remaining water from
the Reservoir and remove the
Reservoir and the mopping pad
plate before charging DEEBOT.
flashes when DEEBOT is
charging. goes out when
DEEBOT is fully charged.
ECOVACS HOME App
To enjoy all available features, it is recommended to control your
DEEBOT via the ECOVACS HOME app.
Before you start, make sure that:
• Your mobile phone is connected to a Wi-Fi network.
• The 2.4GHz band wireless signal is enabled on your router.
• The Wi-Fi indicator light on DEEBOT is slowly flashing.
ECOVACS HOME
Wi-Fi Indicator Light
Slowly flashing
Rapidly flashing
Solid
Tips: If you have any problems during the Wi-Fi setup process, refer
to the Troubleshooting > Wi-Fi Connection section in this manual.
Disconnected to Wi-Fi or
waiting for Wi-Fi connection
Connecting to Wi-Fi
Connected to Wi-Fi