12"
Faucet Location
(305 mm)
60" (1524 mm) x
32" (813 mm)
17-1/4"
6-1/2"
(438 mm)
(165 mm)
13"
(330 mm)
60" (1524 mm)
x 42" (1067 mm)
3. Rough-In the Plumbing – Drop-In Installations
CAUTION: Risk of personal injury. Do not select a large rim-mount faucet or large deck-mount
faucet for this product. These faucets may be inadvertently used as a means of support and are not
appropriate or safe for this installation. Select a wall-mount faucet or alternative deck-mount faucet.
NOTE: Do not install the trim at this time.
Before installing a rim- or deck-mount faucet, measure and cut a piece of 3/4" exterior grade
plywood to act as a support under the bath rim. Cut a piece of plywood large enough to support
the faucet components and extend beyond the area where the faucet will be installed.
Install the water supply pipes at one of the specified faucet locations. Refer to the faucet
manufacturer's instructions for proper installation.
Strap the supply lines to the stud framing.
Install the valves according to the faucet manufacturer's instructions.
1139487-2-F
12"
(305 mm)
4" (102 mm)
3-1/8"
(79 mm)
3-1/8"
4" (102 mm)
(79 mm)
3-1/8" (79 mm)
16"
(406 mm)
14-1/2"
(368 mm)
60" (1524 mm) x
36" (914 mm)
3"
27" (686 mm)
(76 mm)
72" (1829 mm) x
42" (1067 mm)
8
23" (584 mm) 3"
(76 mm)
72" (1829 mm) x
36" (914 mm)
Rim
Install the faucet
to the rim and
plywood according
to the faucet
manufacturer's
instructions.
Sterling