koban KMOS-01 Guía De Usuario página 218

5-6 Temperature Measurements .
1.Set the function switch to the green
TEMP( C or F) position. ° °
2.press the soft key labeled Menu. Move the
menu selector to the menu item labeled
TEMP . Press the soft key TEMP(C or F).
3 .Insert the Temperature Probe into the input
jacks, making sure to observe the correct
polarity.
4 .Read the temperature in the display
5 .To input a temperature offset value, press
the softkey labeled Offset to open a message
box with the present offset value.
Use and to position the cursor over
one of the digits or the polarity sign.
Use and to scroll through the numbers
for each digit in the offset or switch between
a + or – offset. With the desired value
displayed, press the softkey labeled OK to
set the temperature offset.
5-7.Frequency Measurements
1.Set the function switch to the green Hz%
position.
2.Insert the black test lead banana plug into
the negative COM jack. Insert the red test
lead banana plug into the positive V jack.
3.Read the Frequency in the display
True RMS Multimeter
8:10pm 06/13/07
auto range
°C
100.00
F1 F2 F3 F4
HELP
HOLD RANGE
HOLD AUTO
MAX
ESC
MIN
V
REC
MODE OSC
Hz
%
10A mV
Temp
Hz
mA %
Ω
μA
CAP
Bluetooth
V Ω CAP
Temp Hz
%
CAT III 600V
8:10pm 06/13/07
auto range
Hz
50.000
0.00%
F1 F2 F3 F4
HELP
HOLD
RANGE
AUTO
HOLD
MAX
ESC
MIN
V
REC
MODE OSC
Hz %
mV
10A
Temp
Hz %
mA
Ω
μA
CAP
Bluetooth
V Ω CAP
Temp Hz
%
CAT III 600V
15