Low Battery Indicator; Information For Users - EdilKamin LOGO Instrucciones De Uso

TEMPERATURE DETECTED BY THE REMOTE CONTROL
With the remote control it is possible to use the very quick and intuitive time programming function.
- If the stove is on: a delayed shutdown can be set using the remote control – from one to twelve hours. The remaining time befo-
re the scheduled shutdown is shown on the synoptic panel's display.
- If the stove is off: a delayed ignition can be set using the remote control – from one to twelve hours. The remaining time before
the scheduled ignition is shown on the synoptic panel's display.
- Setting: proceed as follows to set the timer:
a) Press the "A" button and the icon
sed.
b) Set the hours by pressing the +/- buttons, for example:
c) Point the remote control towards the synoptic panel receiver
d) Confi rm the setting by pressing the "A" button for a few seconds; the icon
scheduled intervention will appear on the synoptic panel.
e) Repeat points a), b), c), d) to cancel the setting, and set the hours to "00H"
BLOCKED KEYPAD
The remote control buttons can be blocked so as to prevent it from going on accidentally.
Press the A and M buttons simultaneously and the key symbol will light up confi rming that the keys have been
blocked. Press the A and M buttons simultaneously once again to unblock the keypad.

LOW BATTERY INDICATOR

When the battery icon lights up it indicates that the batteries inside the remote control are almost fl at. Replace them
with three new batteries of the same model (size AAA 1.5V).
- Do not use new batteries with used ones.
- Do not mix brands and different types as every type and brand has a different capacity.
- Do not mix traditional batteries with rechargeable ones;
- Do not try recharging alkaline and zinc-carbon batteries as this can cause them to break and/or a liquid leakage.
In accordance with Art. 13 of the Legislative Decree No. 151, dated 25 July 2005, "Implementation of Directives:
2002/95/EC, 2002/96/EC and 2003/108/EC, pertaining to the reduction of hazardous substances used in electrical and
electronic equipment, as well as disposal of waste". The crossed-out wheeled bin symbol shown on the equipment or on the
packaging indicates that the product must be disposed of separately at the end of its useful life. Therefore, at the end of the
equipment's useful life, the user must hand in the equipment to suitable collection facilities for electrical and electronic waste, or
return it to the retailer when a new, equivalent appliance is purchased in a ratio of one to one.
INSTRUCTIONS FOR USE
will light up on the display, thereby confi rming the "Easy timer" program has been acces-

INFORMATION FOR USERS

- 32
will go off and the remaining time before the
-