Tabla de contenido
Publicidad
USE & MAINTENANCE
Functions
Shower head (pos. A, see "Use of functions")
Shower blowpipe (pos. B)
located in the upper part, creates a generous rainfall jet.
Vertical hydromassage (pos. C and D)
equipped with 4 simultaneous water jets that come out of the noz-
zles on the wall.
Jets can be tilted in four directions, by pressing the nozzle and mov-
ing it to the required position.
Use of functions
GENERAL NOTES:
Never use water at a temperature of over 60 °C, to prevent
damage to the plumbing circuit.
NOTE: It is also possible to use two functions at the same time. Just
position the diverter dial half way between the two func-
tions.
THERMOSTATIC TAP FIXTURES
Before you use any function, you should adjust the water tempera-
ture to the value you want by doing the following:
I Turn the dial (M) so that the notch matches up with the cho-
sen value. The knob is provided with a safety lock that fixes the
temperature at 38°C; to select higher temperatures, push the
button (P).
I If you wish to try the water temperature, turn the diverter di-
al (G) to the "showerhead" (A) position and turn the stop tap (R)
to let water come out.
I Once the required water temperature has been reached, turn
the dial (G) to the position that indicates the function you want
to use
C
D
C
D
Remember to turn off the stop tap every time after use (R). If tempera-
tures above 38 °C have been selected, it is advisable to turn back the
thermostatic mixer dial to the position before the safety lock.
27
Skin
B
A
Sense
B
Twice
A
R
38°
G
M
P
Publicidad
Tabla de contenido
