Cleaning And Storage - Honeywell Miller MightEvac Manual De Instrucciones

8.2 Maintenance
Basic care of all fall protection equipment will prolong the durable life of the unit and will contrib-
ute toward the performance of its vital safety function.
Servicing
Servicing of the Miller MightEvac Self-Retracting Lifeline must only be carried out by
Honeywell Safety Products or persons or entities authorized in writing by Honeywell. A record
log of all servicing and inspection dates for this device must be maintained. Only original Miller
replacement parts are approved for use in this device. Repairable devices must be returned
to our facilities or an approved service center whenever subjected to fall arresting forces for
physical inspection and recertification. Non-repairable devices that do not pass inspection
must be disposed of in a manner to prevent inadvertent further use. Contact your Honeywell
distributor or call Honeywell Technical Services at 1-800-873-5242 (press 4) for a return
authorization number.
Miller self-retracting lifelines require no annual factory recertification.*
*[Note for CSA Approved Products: CSA Z259.2.2-98 requires Type 2 and Type 3 devices to be
returned to the manufacturer or an approved service agent no more than 2 years after the date of
manufacturer for inspection and maintenance and annually thereafter.]
*[Note for ANSI Approved Products: ANSI Z359.14 requires factory authorized inspection of
devices. Frequency is based on the type of use and conditions of use. Refer to Appendix A:
Inspection Requirements in ANSI Z359.14.]

Cleaning and Storage

Periodically clean the exterior of the device and wipe the lifeline using a damp cloth and mild
detergent. Towel dry. When not in use, store in a clean, dry location, free of exposure to heat,
light, excessive moisture, oil, chemicals, vapors, or other degrading elements. The lifeline
should be fully retracted into the device when not in use.
Us er Ins tru ct ion s - Engl is h
19