Make sure the door is properly closed. Otherwise, the program will not start.
•
A
ddINg wAShINg pROduCT TO The mAChINe
The amount of washing product used in the machine will depend on the following
factors:
Do not select a pre-wash if the laundry is only lightly soiled. Pour a small amount of
•
washing product (according to the manufacturer's instructions) into compartment
II of the dispenser drawer.
If the laundry is extremely soiled, select a program with pre-wash and pour % of the
•
amount of washing product to be used in compartment I of the dispenser drawer
and the rest in compartment II.
Use washing machine washing products only. Follow the manufacturer's instructions
•
for the amount of washing product to use.
In areas with hard water, increase the amount of washing product used.
•
The larger the load of laundry, the more washing product is required.
•
Pour the fabric softener into the central compartment of the dispenser drawer. Do
•
not exceed the MAX level.
Thick fabric softeners can clog up the drawer and should be diluted.
•
Washing liquids can be used with all programs without pre-wash. To do this, slip
•
the graduated ruler for washing liquid (*) into the guide rails of compartment II of
the dispenser drawer. To fill the compartment with the required amount of washing
liquid, use the graduations on the ruler.
(*) The technical characteristics may vary depending on the model of machine.
u
SINg The mAChINe
1.
Connect the machine to the mains power supply.
2.
Turn on the water supply.
Open the machine door.
•
Distribute the laundry evenly inside the machine.
•
Gently push the door closed until you hear a click.
•
49
V.1.0