Cleaning The Drain Pump Filter - Listo LF512-L2b Instrucciones De Uso

Cleaning the drain pump filter:

1. Use the washing powder scoop (*) supplied with the machine or the washing
liquid measuring plate to open the access panel to the pump.
2. Insert the end of the washing powder scoop or the graduated ruler for washing
liquid into the opening of the panel, and gently lever it open. The panel comes off.
Before opening the filter access panel, place a container underneath to collect any
•
water that is still in the machine.
Loosen the filter by turning it anticlockwise, and pull it out. Wait for the water to drain.
•
NOTE: Depending on the amount of water inside the machine, the container
may need to be emptied several times.
3. Remove any foreign bodies in the filter using a soft brush.
4. After cleaning, insert the filter back in its place and turn it clockwise to secure it.
5.When closing the pump access panel, check that the tabs inside the panel match up
with the holes on the front of the machine.
6.Close the filter access panel.
WARNING: The pump may be hot; wait for it to cool down before
carrying out any maintenance or cleaning.
(*) The technical characteristics may vary depending on the model of machine.
d
ISpeNSeR dRAweR
Over time, washing product can build up in the dispenser drawer. It is advisable to
remove the dispenser drawer every 2 months to remove any residues that have built
up.
V.1.0 62