Listo LF512-L2b Instrucciones De Uso página 58

NOTE: The duration of the programs may vary depending on the amount of
laundry, the quality of the water, the ambient temperature and the additional
functions selected.
(*) As this program is shorter, we recommend that you use less washing product.
This program may take longer than 15 minutes if the machine detects an unevenly
distributed load. The machine door will unlock 2 minutes after the end of the washing
program. (These 2 minutes are not included in the duration of the program).
(**) suitable for washing normally soiled cotton fabrics that are washable at 40°C or
60°C, in the same cycle. This program is also used to assess compliance with Union
legislation on Eco design.
In accordance with regulations 1015/2010 and 1061/2010, program 3 and program
4 are respectively the "standard 60°C cotton program" and the "standard 40°C cotton
program".
The Eco 40-60 program is for washing normally soiled cottons in the same cycle,
whether they are washable at 40°C or 60°C. This program is used to assess compliance
with European Eco-design legislation.
The most energy efficient programs are usually those that run at lower temperatures
•
and for longer periods of time.
By following the capacity recommended by the manufacturer for each program
•
when loading the washing machine, you will be helping to save energy and water.
The program duration, energy consumption and water consumption values may vary
•
depending on the weight and type of load to be washed, the additional functions
selected, the water and ambient temperature.
Use washing liquid for low temperature washing programs. The amount of washing
•
liquid to be used may vary depending on the amount of laundry and how dirty the
laundry is. Please follow the washing liquid manufacturers' recommendations for
the amount you should use.
The noise and the residual moisture content are affected by the spin speed. The
•
higher the rotation speed during the spin cycle, the louder it will be and the lower
the residual moisture content.
You can access the product database, where the model information is stored, by
•
scanning the QR code on the energy label.
I
mpORTANT INfORmATION
Only use washing products, fabric softeners and other additives that are made
•
for automatic washing machines. If too much foam is detected because of an
V.1.0 58