Listo LF512-L2b Instrucciones De Uso página 61

To remove the filter mounted on the water inlet valve, use long nose pliers to gently
•
pull on the plastic bar inside the filter.
A second filter is mounted on the end of the water inlet hose to be connected to the
•
tap. To remove the second filter, use long nose pliers to gently pull on the plastic
bar inside the filter.
Thoroughly clean the filter using a soft brush and wash with soapy water, then rinse
•
thoroughly. Push the filter back in place by pressing it lightly.
WARNING: The filters on the water inlet valve can become clogged as
a result of poor water quality or lack of maintenance. This may cause
leaks. Such incidents are not covered by the warranty.
d
RAIN pump fILTeR
The washing machine's drain pump filter system helps extend the life of the pump
by preventing lint from getting inside. We recommend cleaning the drain pump filter
every 2 months.
The drain pump filter is located behind the panel in the lower right corner of the front
of the machine.
61 V.1.0