16
39. Obtain the kit supplied WCM (1) , connect the ignition
harness (2) and antenna harness (3).
40. Position the WCM (3) through the radio cavity and
over the ignition switch (4).
securing the WCM, tighten the fastener securely.
41. Install the fasteners securing the ignition switch (4).
Tighten the fasteners securely.
42. Install the ignition antitheft bracket (2). Install the fas
tener securing the bracket. Tighten the fastener se
curely.
43. Position the LH top pad into the vehicle.
44. Hand tap the LH top pad around the perimeter to en
gage the retaining clips.
45. Install the two fasteners (2) below the vent and trunk
release switch. Tighten the fasteners securely.
46. Connect and install the trunk release switch (1).
Jan 19, 2011
Install the fastener
4280360
K6861246