Mopar 4280360 Manual Del Usario página 2

2
CALL OUT
1
2
3
4
5
6
7
8
9
10
Fiber/Trim Stick
Ratchet with Long & Short Extensions
Flat Head Screwdriver
CAUTION:
XBM remote start can ONLY be installed on vehicles that have the following factory options: Automatic Trans­
mission, Remote Keyless Entry and Immobilizer.
WinFobik based vehicles, the sales code must be added to the database prior to installing the new WCM module.
Failure to do so will render the WCM module's remote start function inoperative.
The technician should wait 1/2 hour between adding XBM sales code in DealerConnect before installing the
WCM module. In the interim, the technician can install all other components except the WCM module.
NOTE: Prior to installation, obtain the four digit PIN from the dealership's parts department.
NOTE: The wiTECH software level must be at the latest release to perform this procedure.
NOTE: Prior to installation, the technician should cut the KEY FOBIK Blanks using the original vehicle's Key
FOBIK as a template.
1. VIN must be updated with the sales code of the added accessory in order to enable system functionality. Using the
DealerCONNECT website and the wiTECH diagnostic application, complete the vehicle configuration.
2. Log on to https://dealerconnect.chrysler.com.
3. On the Home page, select the "Service" tab.
4. On the Service page, look for the Global Claims System area and select "Vehicle Option".
5. On the Vehicle Option page, enter the last eight digits of the VIN, then select "View".
6. On the "Available Vehicle Option'" list, scroll down the list and select "XBM Remote Start System".
7. Click the "Add" button and make sure "XBM Remote Start System" appears in the "Selected Vehicle Option" list on
the right.
8. Click the "Save" button to complete adding the sales code to the vehicle database.
PROCEDURE STEPS:
Jan 19, 2011
DESCRIPTION
Hood Switch Harness
Hood Ajar Switch
Wireless Control Module
FOBIK Blanks
Remote Start Antenna
Zip Ties
Rivet
Remote Start Antenna Mounting Fasteners
Remote Start Antenna Mounting
Fastener Inserts
Hood Ajar Switch Plunger
Tools Required
10mm, 13mm, 15mm Socket (Deepwell),
T­20 Torx Head Socket
Long & Short Phillips Head Screwdriver
wiTECH software
4280360
QUANTITY
1
1
1
2
1
10
1
2
2
1
Small Pick & Pry Tool
Sidecutters
Rivet Gun
K6861246