Useful Information - Atlas Copco D2112 Manual Del Usario

D2112
• Do not ignore symptoms such as persistent or recurring
discomfort, pain, throbbing, aching, tingling, numbness,
burning sensation, or stiffness. Stop using the tool, tell
your employer and consult a physician.
Noise and Vibration hazards
• High sound levels can cause permanent hearing loss and
other problems such as tinnitus. Use hearing protection
as recommended by your employer or occupational
health and safety regulations.
• Exposure to vibration can cause disabling damage to the
nerves and blood supply of the hands and arms. Wear
warm clothing and keep your hands warm and dry. If
numbness, tingling, pain or whitening of the skin occurs,
stop using tool, tell your employer and consult a physi-
cian.
• Hold the tool in a light but safe grip because the risk
from vibration is generally greater when the grip force is
higher. Where possible use a suspension arm or fit a side
handle.
• To prevent unnecessary increases in noise and vibration
levels:
• Operate and maintain the tool, and select, maintain and
replace the accessories and consumables, in accordance
with this instruction manual;
• Do not allow the drill bit to chatter on the workpiece.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your ex-
posure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out micro-
scopic particles.
• Proceed with care in unfamiliar surroundings. Hidden
hazards may exist, such as drilling into electric or other
utility lines. This tool is not insulated from coming into
contact with electric power sources.
• This tool is not recommended for use in potentially ex-
plosive atmospheres.
© Atlas Copco Industrial Technique AB - 9836 3455 00
DO NOT DISCARD – GIVE TO USER
Signs and stickers
The product is fitted with signs and stickers containing im-
portant information about personal safety and product main-
tenance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.

Useful information

Website
Log in to Atlas Copco: www.atlascopco.com.
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art
preventive maintenance through its ToolCover contracts. For
further information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains the most up-to-date product
information such as:
Safety Information
5