How to Wire Your Ceiling Fan (continued)
4. Connect green wires from hanger bracket and
hanger ball to bare (ground) wire using wire
connector supplied. Connect black wire from
receiver unit marked "AC IN L" to black supply wire
using wire connector supplied. Connect white wire
from receiver unit marked "AC IN N" to white supply
wire using wire connector supplied. Connect white
wire from receiver unit marked "TO MOTOR N" to
white wire from fan using wire connector supplied
with receiver. Connect black wire from receiver unit
marked "TO MOTOR L" to black wire from fan
using wire connector supplied. Lastly, connect blue
wire from receiver to the blue fan light wire using
wire connector supplied. Position all connected
wires and receiver antenna to allow installation of
ceiling canopy (Figure 5).
5. After connections have been made, turn leads
upward and carefully push leads into the outlet box,
with the white and green leads to one side of the
box and the black leads towards the other side.
The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor
on one side of the outlet box and the ungrounded
conductor on the other side of the outlet box
(Figure 6).
NOTE: This step is applicable after the necessary wiring
is completed.
▲WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy housing
and not pinched between the housing and the ceiling.
1. Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed (Figure 1a).
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature (Figure 1b).
Installing the Canopy Housing
HARDWARE USED:
WIRE
CONNECTORS
LISTED
OUTLET BOX
BLACK-ANT
Figure 1a
10
Figure 5
x 6
WHITE
BLACK
BLUE
GREEN - Ground Wire
From Hanger Ball
GREEN - Ground Wire From
Hanger Bracket
Figure 6
Figure 1b