Playcore Swing-N-Slide PB 9242 Instrucciones De Ensamblaje página 27

LA 6347 Bighorn_- 11/29/11 9:02 AM Page 27
Fig. 19
x2
2-1/2''
Fig. 19b
(12) [PF 3610] 1'' x 6'' x 47-1/2''
2-1/2'' screw
Roof Assembly.
1. Assemble (2) A-Frames as shown in (Fig. 19).
2. Attach (14) Roof Slat as shown in (Fig. 19a).
Note: Start at the top of the roof and work down.
3. Attach remaining Roof Slats as shown in (Fig. 19b).
4. Attach Roof to Unit as shown in (Fig. 19c).
(2)
1-1/2'' screws
per joint
(1) [PF 4006] 1'' x 6'' x 12'' Gable Top
2-1/2''
(1) [PF 4004] 1'' x 4'' x 18-3/4'' Gable Bottom
[PF 4022]
2'' x 2'' x 24''
(2)
2-1/2'' screws
per joint
(2)
1-1/2'' screws
per joint
Shingle
3-1/2''
Roof Supports Will Rest
on 1'' x 4'' Board Over
The Swing Beam
14-1/2''
Secure roof to uprights by
inserting hardware
through gap in brackets
1-1/2'' screw
27
Assembly Plan
Fig. 19a
(2)
1-1/2'' screws
per joint
START AT
TOP
Fig. 19c
(2)
2-1/2'' screws
per joint
1-1/4'' screw