Playcore Swing-N-Slide PB 9242 Instrucciones De Ensamblaje página 33

LA 6347 Bighorn_- 11/29/11 9:02 AM Page 33
Fig. 25
FLUSH
1-1/4'' Lag screw
Monkey Bar Assembly Cont.
1. Attach the Monkey Bar Frame to the Monkey Bar Ladder as shown in (Fig. 25).
2. Dig (2) 8'' diameter holes, 16'' deep, at the locations shown in (Fig. 25b).
3. Attach the Monkey Bar Ladder to the unit as shown in (Fig. 25a) and (Fig. 25b).
Pre-Drill Note: To prevent wood from splitting, pre-drill the (6) holes for the 1-1/4'' Lag Screws. Use a 1/8'' drill
bit & drill to a maximum depth of 1-1/4''.
4. Level the assembly, fill in holes and compact earth around posts.
(3)
1-1/4'' Lag Screws
per bracket
FLUSH
Pre-Drill
25-1/2''
Fig. 25a
FLUSH
(3)
1-1/4'' Lag
Screws
per bracket
(3)
3-1/2''
1-1/4'' Lag screws
per bracket
Fig. 25b
11"
16"
8'' Diameter
33
Assembly Plan
74-5/8"
57''