Tabla de contenido
Publicidad
LA 6347 Bighorn_- 11/29/11 9:02 AM Page 39
Fig. 31
DUAL KID KRUZER.
1. Thread chains through Dual Kid Kruzer handles as shown in (Fig. 31).
2. Attach handle assembly to seat using (1) 6 1/4" hex head bolts, (1) 5/16" loc washer, (2) 5/16" washers,
and (1) 5/16" loc nut as shown in (Fig. 31). Repeat this for the other side.
NOTE: Do not overtighten bolts. The bolt threads should not extend beyond the end of loc nut.
Overtightening can damage the Dual Kid Kruzer assembly and cause injury. Check this connection
frequently to see if the loc nut stays in position. If there is any problem keeping the loc nut in position,
replace it immediately.
3. Attach Dual Kid Kruzer to set. Crimp all swing hangers and clamps tightly as shown in (Fig. 31a).
39
Assembly Plan
Fig. 31a
Publicidad
Tabla de contenido
