Moretti Forni PM 60.60 Manual Instrucciones página 15

01 TECHNICAL SPECIFICATIONS
02 INSTALLATION
03 OPERATION
04 ORDINARY MAINTENANCE
05 SPECIAL MAINTENANCE
06 LIST OF SPARE PARTS
Note:
This catalogue is printed in five different languages. Original instructions in Italian and translations of the original instructions in English,
French, German and Spanish.
WARRANTY
Standards and rules
Warranty covers only the replacement free to factory of pieces eventually broken or damaged because of faulty materials or manufacture.
Warranty does not cover any damages caused by third party transport or due to an incorrect installation or maintenance, to
carelessness or negligence in usage, or to tampering by a third party.
Moreover, warranty does not cover: glass components, covers, bulbs and whatever depends on normal wear and deterioration of
both oven and accessories; nor does it cover labour costs involved in replacing pieces covered by warranty.
Warranty ends in case of non-compliance with payments and for any elements that may be repaired, modified or disassembled, even in part,
without prior written consent. For technical service during the warranty period, please send a written request to the local concessionary agent
or directly to the Sales Department.
WARNING
This word indicates a danger, and will be employed every time the safety of the operator might be involved.
NOTE
This word indicates the need for caution, and will be employed to call attention to operations of primary importance for correct and long-
term operation of the oven.
DEAR CUSTOMER
Before using the appliance, please read this user manual.
For the safety of the operator, the appliance safety devices should always be maintained in a proper state of efficiency.
This user manual intends to illustrate use and maintenance of the appliance. For this reason, the operator is advised to follow the instructions
given below.
The manufacturer reserves the right to make improvements to the product and manual, without necessarily updating existing products and
manuals.
WARNING!
1. The following instructions are provided for your safety.
2. Please read them carefully before installing and using the appliance.
3. Keep this user manual in a safe place for future consultation by the operators.
4. Installation must be carried out in accordance with the Manufacturer's instructions by qualified and licensed staff.
5. This oven must only be employed for the purposes for which it was designed, that is to say to cook pizza or similar food
products. It is prohibited to bake products containg alcohol. Any other use can be classed as improper.
6. The appliance is for institutional use only, and must only be operated by a qualified professional user who has been trained to
use it. The appliance is not intended for use by people (including children) with reduced physical, sensory or mental
capabilities or who lack experience or training. Children should be supervised to ensure that they do not play with the
appliance.
7. When carrying out repairs, always contact one of the Manufacturer's authorised service centres and request that original
spare parts be used.
8. In the event of breakdown or malfunction always disconnect the appliance, and do not attempt to make adjustments or repairs
yourself.
9. Failure to comply with the above may compromise the safety of the appliance.
10. Should the appliance be sold or transferred to another owner, or should the current owner change his premises and wish to
leave the appliance installed, always ensure that this manual remains with the appliance, so that it can be consulted by the new
owner and/or the person carrying out installation.
11. In the interests of risk prevention, if the connection cable is damaged in any way, it must be replaced by a technical assistance
service approved by the manufacturer.
12. During installation, should there be any disturbance to equipment sharing the same power supply source, make sure that the
impedence is suitable at the interface point and that the service current capacity is correctly sized for appliance emissions to
conform to EN 61000-3-11 and EN 61000-3-12 standards and subsequent modifications.
INDEX
UK/1