Ford F-Serie Manual De Instrucciones página 16

SECTIONING OF THE FLOOR PAN
NOTE: Partial sectioning of the floor pan is allowed, based on technician judgement and extent of damage.
For a robust and proper repair, the following criteria must be met:
• The damaged area is measured and pulled/restored back to original dimensional condition.
• The repair area must be at least 50mm away from the seat mounting track locations on the floor pan.
• The repair panel must be installed to crossmembers/sills/rockers using the specified rivet patterns and
rivet type/sizes. (Refer to Figures 1 - 3).
• At least a 1" overlapping flange is maintained between the repair and original repair panels.
• The repair panel flange must be prepared and adhesive fully applied as per the general information guidelines.
• The repair flange rivets are Blind Rivets (W707638-S900C). The number of blind rivets used depends on the
size of the repair panel. The rivets must be installed no further than 3" apart around entire repair panel.
• After installation of the repair panel is complete, follow all sealing, refinish, and corrosion protection steps required.
CPR © 2016 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
4-16
SKFL34-1611140-AC
F-SERIES CREW CAB FLOOR PAN INSTALLATION -
SERVICE KIT INSTRUCTIONS
SHEET 5 OF 5