Ford F-Serie Manual De Instrucciones página 29

• (Refer to Figure 2) for location for adhesive material.
• See C-Pillar between outer and inner door opening panel for rivets. Rivets must be placed adjacent and must
not overlap.
NOTE: See Regular Cab door opening panel for associated rivets.
NOTE: The location of SPR and adhesive shown below are based on the original production drawings and
should only be used as a guideline. (Refer to Figure 2).
THREE (3)
W708777-S900C
BLIND RIVETS
ONE (1)
W702554-S900C
BLIND RIVET
THIRTEEN (13)
W708777-S900C
BLIND RIVETS
ONE (1) W702554-S900C
BLIND RIVETS
THREE (3)
W708777-S900C
BLIND RIVETS
C-PILLAR OUTER FOR REGULAR CAB
SQUARED NUMBERS ARE PRO SPOT MANDRELS
1 SA-0400/SA-0401
2 SA-0400/SA-0402
CIRCLED NUMBERS ARE SOLID RIVETS
1 W790376-S900
2 W790377-S900
ELEVEN (11) W717337-S900
CODE PX INSTALLED WITH
MANDREL DG10-200/H
2
TWO (2) W702512-S900C
BLIND RIVETS ONLY
TWO (2) W708777-S900C
BLIND RIVETS
ONE (1) W702554-S900C
BLIND RIVETS
FIGURE 1
CPR © 2016 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
4-16
BLACK WAVY LINES
REPRESENT THE
LOCATION OF THE
ADHESIVE MATERIAL
2
SKFL34-1624300-AB
F-SERIES BODY INSTALLATION
(REGULAR CAB C-PILLAR OUTER ) AND
(CREW CAB B-PILLAR OUTER) -
SERVICE KIT INSTRUCTIONS
FIGURE 2
SHEET 3 OF 3