Ford F-Serie Manual De Instrucciones página 333

• MIG plug welds are to be performed using 5554 wire at 1.2mm, using pure argon as a shielding gas.In
perparation for the plug welds, identify the specific weld locations and number, and drill a 6.5mm hole in the top
panel for each location to weld.
FRONT OF
VEHICLE
TWENTY-EIGHT (28) W707638-S900C BLIND
RIVETS - (FOURTEEN (14) EACH SIDE)
TWELVE (12) W707638-S900C
BLIND RIVETS - (SIX (6) EACH SIDE)
RH SIDE SHOWN, LH SIDE SIMILAR
RH SIDE SHOWN, LH SIDE SIMILAR
CPR © 2016 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
4-16
FIGURE 1
TWENTY-SIX (28)
W702512-S900C BLIND RIVETS
(THIRTEEN (14) EACH SIDE)
FIGURE 2
SKHC3B-9927894-AB
SUPER DUTY BOX WHEEL HOUSE ASSEMBLY -
SERVICE KIT INSTRUCTIONS
SHEET 4 OF 5