Designated Use; Obligations Of The Operator; Personal Protective Equipment (Ppe) - Abicor Binzel MF3-Laser Front/Rear Instructivo De Servicio

MF3-Laser Front/Rear
1 Identification
The MF3-Laser Front/Rear is part of the MFS wire feeder system and is used in industry and the trade for the delivery
of welding wire or solder for laser applications.
The MF3-Laser Front/Rear is a 4 roll-drive that is solely used as a wire feed.
All other media (coolant, shielding gas, or welding current) required for the joining process can be supplied separately.
These operating instructions describe only the MF3-Laser Front/Rear master feeder. It may be operated using original
ABICOR BINZEL spare parts only.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding marking has
been affixed to the product, if required.
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the manner described in these
instructions. When doing so, please observe the operating, maintenance, and servicing conditions.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the performance are not permitted.

2.2 Obligations of the operator

• Only the following personnel may work on the device:
• those who are familiar with the basic regulations on occupational safety and accident prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• those who have read and understood the chapter entitled "Safety Instructions";
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training, knowledge, and experience.
• Keep other people out of the work area.
• Observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention.

2.3 Personal protective equipment (PPE)

To prevent danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves, and safety shoes.
BAL.0511.0 • 2019-06-13
1 Identification
EN - 3