Functional Description - Abicor Binzel MF3-Laser Front/Rear Instructivo De Servicio

MF3-Laser Front/Rear
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully rule out the risk of damage during
transport.
Goods-in inspection
In case of complaints If the delivery has been damaged during transport, contact the last carrier immediately.
Packaging for
returns
Tab. 11 Transport
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-6

5 Functional description

The media required for the welding process (welding current, shielding gas and coolant) are passed through the
MF3-Laser Front/Rear media plate and fed to the feeding body. The four-roll drive feeds the wire at a constant wire feed.
The speed is controlled by a higher-ranking control.
1
6
1 Flex supply interface
2 Drive for MF3-Laser Front
Fig. 3 Functional description/overview
BAL.0511.0 • 2019-06-13
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
Retain the packaging for potential inspection by the carrier.
Where possible, use the original packaging and the original packaging material. If you have
any questions concerning the packaging and/or how to secure an item during shipment,
please consult your supplier.
2
5
3 Wire feeding
4 Control lead
5 Functional description
3
4
5 Media plate
6 Media hoses
EN - 9