STOK QUATTRO SGP4330 Manual Del Operador página 11

STEP 5: MOUNTiNG THE GRiLL ASSEMBLy
TO THE cABiNET
See Figure 9.
NOTE: This step requires two people to lift and correctly
position the grill assembly on the cabinet.
 With the hood closed, lift the grill assembly.
 Lower the grill assembly onto the cabinet aligning
holes in the firebox with holes in the cabinet.
NOTE: Regulator hose should be hanging down inside
the cabinet; be careful not to damage.
 Using four bolts, M5 x 12 mm (EE) one in each corner,
secure the grill assembly to the cabinet.
bolt
(ee)
grill
assembly
firebox
Fig. 9
ASSEMBLY
regulator
hose
11
STEP 6: iNSTALLiNG HEAT TENTS
See Figure 10.
Heat tents work to evenly distribute heat inside the grill.
Do not grill without the heat tents installed.
 Fully raise the hood.
 Carefully place the heat tent (right) over the gas ele-
ments on the right side over the gas burners.
 Next place the heat tent (left) over the gas elements on
the left side over the gas burners.
hood
heat tents
(left)
Fig. 10
heat tents
(right)
gas
burner