STOK QUATTRO SGP4330 Manual Del Operador página 16

 Remove cap from LP gas cylinder.
 Hold the regulator firmly and insert nipple into the gas
cylinder valve.
NOTE: Nipple must be centered in the cylinder valve.
 Holding coupling nut and regulator as shown, turn
coupling nut clockwise and tighten by hand taking care
not to crossthread the connection. Do not use tools.
NOTE: The regulator will seal in the cylinder valve
resulting in some resistance. An additional one-half
to three-quarters turn is required to complete the
connection. If you cannot complete the connection,
disconnect and repeat the above two steps. If you still
cannot complete the connection, DO NOT use this
regulator!
 Inspect valve connections port and regulator. Look for
any damage or debris. Remove any debris. Inspect
hose for damage. Never attempt to us damaged or
plugged equipment. See your local LP Gas Dealer
for repairs.
Fig. 20
ASSEMBLY
handwheel
Fig. 21
cylinder
valve
plastic
strap and
cap
Fig. 22
16
cylinder
valve
cylinder
valve
regulator
nipple
coupling
nut
regulator